AFS Air Flow Sensors

EOL - End of Life

  • Realized high and long-term stability
  • Small platinum thin film thermal sensor and an even temperature differential operating circuit ensure a quick response
  • Built-in temperature compensation circuit assures correct values regardless of air temperature
  • Products have no rotating mechanism and are resistant to vibration

BLR Ceramic, Custom Resistors

Not Recommended for New Design
  • Power rating: 1W, 2W, 15W
  • Resistance range: 8m ~ 50mΩ
  • Tolerance: ±5%, ±10%

BR BGA Resistor Network

    EOL - End of Life

  • Virtually eliminates channel capacitance, a primary cause of reduced system performacne
  • Erases routing design of DDR SDRAM termination
  • Number of terminals: 27 & 36

CCP Fast Blow Chip Fuses

EOL - End of Life

  • Immediate cut-off of excessive heat
  • No generation of heat
  • UL94V0 epoxy case
  • Current rating: 0.75 ~ 5A
  • Sizes available: 1206, 1210

CN Isolated Chip Networks-Concave Termination, Square Corners

    EOL - End of Life

  • Resistance range: 1 ~ 1MΩ
  • Tolerance: +1% ~ +5%
  • Size: 0603, 0805, 1206 x2, x4, x8 elements, 0402 x2, x2 elements

CN-RT Isolated Chip Networks-Concave Termination, Square Corners (Anti-Sulfur)

    EOL - End of Life

  • Excellents anti-sulfur characterisitcs
  • Passes ASTM-809 anti-sulfuring testing

CNB Bussed Concave Termination, Square Corner Resistor Array

    EOL - End of Life

  • Resistance range: 1 ~ 470KΩ
  • Tolerance: +5%
  • Sizes available: 4 or 8 elements included in one array

CND Bussed Concave & Convex Termination, Square Corner

    EOL - End of Life

  • Resistance range: 22 ~ 100kΩ
  • Tolerance: +5%
  • Sizes: 0603, 0805, 1260 x8 elements

CNZ Zero Ohm Jumper

    EOL - End of Life

  • Current rating@70°C (per elements): 0.5A & 1A
  • Sizes: 0402, 0603, 0805, 1206 x2, x4, x8 elements

CN_K, CN_N Isolated Chip Networks-Convex Termination, Square Corners

    EOL - End of Life

  • Resistance range: 1 ~ 1MΩ
  • Tolerances: +1% ~ +5%
  • Sizes: 0402, 0603 x2, x4, 0602 x8 elements

CN_KRT Isolated Chip Networks-Convex Termination, Square Corners (Anti-Sulfur)

    EOL - End of Life

  • Excellents anti-sulfur characterisitcs
  • Passes ASTM-809 anti-sulfuring testing

CN___A Isolated Chip Network, Flat Termination, Square Corners

    EOL - End of Life

  • Resistance range: 10 ~ 1MΩ
  • Tolerances: +1% ~ +5%
  • Sizes: 0603 x8 elements

CR Network Resistors

Not Recommended for New Design
  • Metal Glaze (Ru02) provide lifetime stability
  • Number of pins: 5 ~ 14
  • Resistance range: 10 ~ 1MΩ
  • Capacitance range: 10pF ~ 0.1μF

HVDQ24 High Voltage Divider- Precision Type Resistors

    Recommended WordStrment for New Design: HVDP08

  • Max. resistance value 11.5MΩ
  • Max. working voltage 1000V
  • Max. resistance Ratio 1000:1
  • Relative tolerance: 0.1%
  • TCR tracking: 10ppm/°C
  • TCR: ±25, ±50ppm/°C
  • Absolute resistance tolerance: ±0.1% ~ ±1%

KL73 Thin Film Inductor

    EOL - End of Life

  • Nominal Resistance: 0.56nH ~ 100nH
  • DC Resistance max (W): 0.10 ~ 14000
  • Inductance tolerance: +0.1nH ~ +5%

KQ/KQT High Q Inductors

EOL - End of Life
  • Ideal for low loss, high output power consumption
  • Q factor min.: 16 ~ 65
  • Inductance range: 1 ~ 10000nH
  • Tolerance: ±0.1n ~ ±20%

KQC High Current Inductors

EOL - End of Life
  • Low DC resistance and high allowable DC current
  • Low profile style of 0.027 inches (0.7mm) typical
  • Nominal inductance range: 1.2 ~ 27nH
  • Tolerance: ±0.1 ~ ±5%
  • Sizes: 0402, 0603

KT11835 Transponder Coil (Rx)

    NRND - Not Recommended for New Design

  • Nominal Inductance: 2.4mH ~ 12mH
  • L,Q Measuring Frequency: 125kHz
  • Upload Qaulity Factor Min: 32 ~ 45

LA73 Thick Film Linear

    EOL - End of Life

  • Twenty-five specifiable temperature characteristics
  • Sizes: 0603, 0805, 1206
  • Thermal dissipation constant (mW°C): 7.6, 8.2, 9.0
  • Max. working voltage: 25V, 50V

LF Radial Metal Film Leaded Resistor

EOL - End of Life

  • Power rating: 0.125W ~ 0.5W
  • Resistance range: 1 ~ 1M
  • TCR: +50ppm/°C, +100ppm/°C, +200ppm/°C

LKS Power chip inductors shielded type

    EOL - End of Life

  • Small size and low-profile
  • Low DC Resistance and larger Rated Current
  • Suitable for reflow soldering

LPC Choke coil Inductors

    EOL - End of Life

  • Small size allows for high mounting density
  • Large DC current capacity with low DC resistance
  • Polarity identification available

LPC4045, LPC4235, LPC4545 Power Chip Inductor

EOL - End of Life
  • Low DC resistance and high allowable current due to proprietary construction & wiring technology
  • DC current max.: 0.07 ~ 3.66A
  • Inductance range: 0.82 ~ 2200μH
  • Tolerance: ±10% ~ ±20%
  • Sizes: 4045, 4235, 4545

LR72A, LR72B, LR72C Custom Low Resistance Current Sense Resistors

Not Recommended for New Design
  • Flexible leads allow for thermal expansion
  • Unique open-center shapes for cooler operation
  • Resistance values: 2 ~ 8mΩ

MO Metal Oxide Power Type Leaded Resistor

    EOL - End of Life

  • Flameproof silicone coating equvalent to UL94V0
  • Power rating: 0.5W ~ 3W
  • Resistance range: 0.2 ~ 150k

MRP Precision Metal Film SIP Network Resistors

Not Recommended for New Design
  • Custom design network
  • Ultra-precision performance for precision analog circuits
  • Absolute TCR: ±25, ±50ppm/°C
  • Tracking TCR: 2, 5, 10
  • Power rating: (mW): element-100, package-200

MRS Plate Shaped High Precision Metal Film Resistors

Not Recommended for New Design
  • Ultra precision TCR up to ±2.5ppm/°C
  • Low tolerance: ±0.01%, ~ ±0.5%
  • Wide resistance range: 10 ~ 1MΩ

NPR Surface Mount Molded Current Sense Resistor

    EOL - End of Life

  • Power rating: 2512-1W, 4527-2W
  • Resistance values: 105m ~ 22MΩ
  • Tolerance: ±0.5%, ±1%, ±5%
  • TCR: ±100ppm/°C

NT73 Temperature Compensation Thick Film Resistors

Not Recommended for New Design
  • Twelve standard resistance values
  • Sizes: 0603, 0805, 1206
  • B constant @25°C/75°C: 3200K ~ 4100K
  • B constant tolerance: ±3%, ±5%, ±10% 

NV73 Metal Oxide Varistors

EOL - End of Life (2E/2J/2L/C2L)

  • Multilayer structure with high surge current
  • Protector against static electricity, switching and incoming surges
  • Varistor Voltage: 6.8 ~ 120V
  • Sizes available: 0201 ~ 2220
  • Max. Energy: 0.001J ~ 14J

NV73DS Load Dump Surge Metal Oxide Varistors

    EOL - End of Life

  • Symmetrical non-linearity V-I characteristics absorb positive and negative surge
  • Meets JASO load dump surge test requirements
  • Max. load dump surge energy: 63 ~ 70J
  • Operating temperature: up to +125°C
  • Sizes available: 2420
  • AEC-Q200 Tested

NVD Metal Oxide Varistor Disc Type

    EOL - End of Life

  • Flame retardant Coating (UL94V-0)
  • Diameter: 05, 07, 10, 14, 20
  • Varistor Voltage: 18V ~ 1800V

NVF Metal Oxide Varistor (Nonflammable Coated)

    EOL - End of Life

  • Flame retardant Silicone (UL94V-0) outer coating
  • Max. Energy (J): 27.5 ~ 67.0
  • Varistor Voltage: 220V ~ 680V

PSB Large Current Sensing, Ultra Low Resistance

    NRND - Not Recommended for New Design

  • Resistance range: 0.2, 0.75, 1mΩ
  • Power rating: 6W, 12.5W
  • TCR: ±75, ±100ppm/°C
  • Tolerance: ±1%

PSE Large Current Sensing, Ultra Low Resistance

    NRND - Not Recommended for New Design

  • Resistance range: 0.5, 1, 1.5, 2mΩ
  • Power rating: 3W, 5W
  • TCR: ±150ppm/°C
  • Tolerance: ±1%, ±5%

PSI Large Current Sensing, Ultra Low Resistance

    EOL - End of Life

  • Resistance range: 3, 4mΩ
  • Power rating: 3W
  • TCR: ±50ppm/°C
  • Tolerance: ±1%

RD412A/2D Fixed Carbon Film MELF Resistors

EOL - End of Life

  • Metal plate terminals
  • Meets or exceeds IEC 60115-8, EIA RC-2131A
  • TCR: +350 ~ -1300ppm/°C
  • Power Rating: 0.25W

RF26 Coat insulated Fusing Resistors (L type)

    EOL - End of Life

  • Quick fusing protects circuit from normal condition
  • Resistance range: 0.1 ~ 1K
  • Power rating: 3W ~ 10W

RK92 High Voltage SIP Resistors

Not Recommended for New Design
  • High resistance resistor for high voltage circuits
  • Flame retardant coats corresponding to UL94V-0 are used
  • Thick film resistors (Ru02) ensure high stability in life and change in aging
  • Resistance range: 1M ~ 1GΩ

RK92D Thick Film Resistors for High Voltage

Not Recommended for New Design
  • High-precision high voltage divider for high voltage circuits
  • Thin SIP shape suitable for space saving mounting
  • Higher relative accuracy of resistance value is possible with one package
  • Power rating: 0.5/0.2W
  • Resistance range: 750k/6.25k, 2M/10k, 13M/26k, 33M/33kΩ

RK92L High Voltage SIP Discharge Resistors

Not Recommended for New Design
  • Excellent overload capability and high stability life and aging even in insulating oil
  • Thin SIP shape suitable for space saving mounting
  • Custom type three-terminal product is available
  • Power rating: 4W
  • Resistance range: 1.2M, 3M, 4M, 5M, 8M, 12M, 16MΩ

RKC, RKH, RKL Thick Film SIP Resistors Network

Not Recommended for New Design
  • Various type of standard circuits in different sizes and power (seated height 0.20", 0.26", 0.42")
  • Higher temperature soldering of the leads prevents terminals from loosening during board assembly
  • Number of resistors: 3 ~ 16
  • Tolerance: ±1%, ±2%, ±5%
  • Resistance range: 22 ~ 2.2MΩ

RM412D, RN412A/2D Fixed Metal Film MELF Resistors

EOL - End of Life

  • Higher stability in short and long term tests
  • TCR: ±25 ~ ±350ppm/°C
  • Power Rating: 0.125W, 0.2W, 0.25W, 0.4W, 0.5W, 1W
  • Resistance range: 0.22 ~ 5. 11MΩ

RM412H, RN412E/2H Fixed Metal Film MELF Resistors

    NRND - Not Recommended for New Design

  • Higher stability in short and long term tests
  • TCR: ±25 ~ ±350ppm/°C
  • Power Rating: 0.125W, 0.2W, 0.25W, 0.4W, 0.5W, 1W
  • Resistance range: 0.22 ~ 5. 11MΩ

RN73 Precision Metal Film Resistors

    EOL - End of Life
    Recommended For New Design WordStrment RN73R

  • High precision tolerance: +0.5% ~ +1%
  • High performance TCR: +5ppm/°C ~ +100ppm/°C
  • Resistance range: 10 ~ 1M

SA Surge Absorber

    EOL - End of Life

  • Surge Current Capacity: 500A
  • DC Spark Over Voltge: 200V ~ 700V
  • DC Spark Over Voltage Tolerance: +20%, +30%

SDT310VASP Small Type Platinum Thin Film Thermal Sensors

    NRND - Not Recommended for New Design

  • Small heater element type with operating temperature range: -55°C ~ +600°C
  • Small as quarter volume convenience type 3.2 second thermal time constant
  • Excellent heat resistance
  • Applies axial lead type suitable to use as heater element
  • TCR: +3850±25ppm/°C

SF Insulated Super Miniature Precision Mental Film Resistor

    NRND - Not Recommended for New Design

  • Resistance range: 100 ~ 5.11M
  • Power rating: 0.125W ~ 0.5W
  • TCR: +5ppm/°C & +10ppm/°C

SHDR Microwave Thin Film

    EOL - End of Life

  • Excellent frequency characteristics up to 15HGz: Reflection coefficient-not more than 15dB
  • Resistance range: 22 ~ 1K
  • Tolerance: +5%

SL1, SL2 Thick Film Current Sensing

    EOL - End of Life

  • Power rating: 2512-1W, 4527-2W
  • Resistance values: 105m ~ 22MΩ
  • Tolerance: ±0.5%, ±1%, ±5%
  • TCR: ±100ppm/°C

SLP Current Sensing Chip Resistors

    EOL - End of Life

  • Power rating: 1W, 2W
  • TCR: ±50 ppm/°C
  • Resistance range: 10 ~ 100mΩ
  • Tolerance: ±0.5%, ±1%

TLR3A Current Sense Resistors, Reduced Size

    NRND - Not Recommended For New Design. Alternative: TLR3AW

  • Power rating: 2512-1W
  • Resistance range: 1m - 4mΩ
  • TCR: ±150ppm/°C, ±200ppm/°C
  • Tolerance: ±1%

TPR Anti-Surge Fusing Resistors

    EOL - End of Life

  • Quickly fuses to overload
  • Terminal temperature under rated load: +125°C and less
  • Max. Open-circuit Voltage: 320V a.c.

WF Thermal Fuse Built-in Resistors

    EOL - End of Life

  • Current rating: 2A, 10A
  • Voltage rating: AC 250V
  • Power rating: 5W, 7W, 10W

XR73B/XR73H/XR73Z Embedded Substrate Flat Chip Resistors

Not Recommended for New Design
  • Interlayer embedding in the multilayer substrates applicable from the height of 0.13 to 0.14mm
  • Cu via hole connection is applicable
  • Resistance range: 1 ~ 10MΩ, zero ohm offered
  • Sizes available: 0201, 0402